Packaging Equipment
(click on an item for pictures and more information)


Ulma P-300 Overwrapper

Ulma P-300 Overwrapper
Model: P-300
Serial: 186
Mfg: 03-84
Adjustable Infeed; 3 3/4" wide wrap area (can be modified); 6" Lug Spacing
Markem Coder.



Bradman Lake carton former model 2 60

Bradman Lake carton former
Model is a 2/60 single
Serial is 4622290

Single head carton former Bradman Lake

Bradman Lake (carton former)
s/n 4622290
220/60/3

carton blank is 27-1/16" x 16-15/16" OAD

Bradman Lake
Sam Hunnicut
704 588 3301
usa@bradmanlake.com



Culbro Tamper Evident sealer model TRA III

CMS Gilbreth Packaging
Culbro Tamper Evident sealer
Model TRA III 50266/50019
s/n 01466 (3-13-91)
approx 5 inch between feed screws
9-1/2" wide film with 1-1/2" final strip height
Allen Bradley series 5000 photo switch
SS construction



Hoppman centrifugal bottle feeder

Hoppman centrifugal bottle feeder
Model FT/40
s/n 16136
Mfg 10/91
Unit is in very good condition.



CAP FEEDER MRM Elgin cap feeder

MRM Elgin cap feeder
formerly used to feed a "snap cap" 2-1/4" in diameter
ss construction
hopper measures: 30" W x 36: L x 20" deep
(30" from floor to top of hopper)
approx 14" belt width
unit discharges at 76" height
Overall: 105" H x 38" W x 60" L
1/2 hp 3 phase motor



Ideal shrink tunnel and bundler combo

Ideal shrink tunnel

Model 514-11973
s/n 0987255
230/115 volt 20 amps
Made in Montreal, Canada





Ideal bundler-wrapper
Model 7100-11971
s/n 0987272
230 volt 8 amps
80 PSI



Shanklin HS-2 horizontal flow wrapper

Shanklin High Speed Wrapper, Md #HS-2, Ruggedly built Shanklin HS-2 wrapper is the overlap-sealing models that combine high speed and smooth product travel with quick and easy size change for the ultimate packaging performance. These machines produce packages with neat trim seals on both ends



Enercon Compak spare parts sealer heads

Enercon Compak spare parts sealer heads
1 new
1 used in good condition
for model LM 3352-03 unit



Rose Forgrove Minerva Flowpak wrapper model RF 605

Rose Forgrove Minerva Flowpak wrapper
Horizontal flow wrapper
Model RF 605
s/n 50216 (1994 age)
7-1/2" lug spacing currently
6" wide sealing jaw

Recently removed from microwave popcorn pack line



Extreme Packaging Model X 16 SERVO horiz flow wrapper

Extreme Packaging Parts & Services horiz flow wrapper
Model: X 16 SERVO SS
s/n J 143 & J 144
Mfg 2004; up to 60 PPM
22" film width: lap seal bottom seal
230 volt
with Vortex placer for labels
MFG phone number 949-888-7221



Aries carton former Type 270

Aries carton former
Type 270
S/N: 43 (mfg 12/04)
230 volt/3 phase
4 infeed lanes at 34"H
Outer belts are 3" wide
Middle belts are 4-1/2" wide
discharge belt is 27" wide

OAD'S: 132"L x 60"W x 100"H



Posimat Bottle Elevator Used to feed Serac N-26 bottle unscrambler

Posimat Bottle Elevator
Used to feed Serac N-26 bottle unscrambler
Type: Elevator
S/N: OC:9658
Mfg: 1998
230/460 volt
Main hopper is 63"W X 162"L X 38" deep
Belt in bottom is 16"W x 162"L
Belting has 2-1/2" high cleats with 20" spacing
unit infeeds at 49" and discharges at 71"
Unit was fed by an MTC pivot dumper
SS construction with vinyl cover over hopper

OAD'S: 256"L X 65"W X 93"H



Seal-A-Tron L-bar/shrink tunnel combo

Seal-A-Tron L-bar/shrink tunnel combo

L-Bar
model OLLBS 1319M
S/N 09069523
120 VOLT 11 AMPS

Tunnel
model OLST-1408-LR15SA
S/N 08139652
208-240 VOLT 1 PHASE 14/16 AMPS

Casters have been removed for shipping.
They are included with the mounting hardware.



Kliklok carton former model JR

Kliklok carton former model JR
Model JR
s/n 391
3/4 hp 115-208/230/60/1 phase

Former section # K-20651
8-18" x 5-1/2" x 1-7/8"

Kliklok’s JR lock-style carton forming machine has the reputation of being one of the most versatile and dependable machines in the industry it is designed to accommodate small- to medium-sized cartons and trays at speeds up to 60cpm. Its compact size makes it ideally suited to installations where space is limited.

http://www.kliklok.com/products/cartoning/topload/formers/more-products.aspx



Orics Tray Sealer model VFG 2000

Orics Tray Sealer model VFG 2000
No tag on unit but we did speak to Orics. Mfg 1995
Originally sold to Land O Frost.
This model has been replaced by the VGF-100 now.
Currently set up for 2 round bowl/trays

MISSING GUARDS AROUND BOWL INFEED AREA


ORICS VGF-100

Designed for small-volume packaging, the versatile VGF-100 can accommodate trays of virtually any shape or size. It can seal up to 10 trays per minute, performing a vacuum gas flush or a straight seal.

Function

Filled trays are placed manually on a carrier, which slides into the body of the machine, where the vacuum/gas flush, seal and die-cut processes are performed.



Swiftpack Automation Ltd. Tablet counter Model S:check

Swiftpack Automation Ltd. Tablet counter
Model S:check
s/n M2782 (2000)
120/60/1 phase
Good working condition
OAD's: 26" x 9" x 24H

(missing feed tray for pill units)

http://www.ima-na.com/swiftcheck.html



Automation Packaging Inc. shrink bundler TYPE: APB 2700S

Automation Packaging Inc. shrink bundler
TYPE: APB 2700S
S/N: 140 (10/91)
440 volt

6"W x 72"L slat top chain infeed conveyor
11-1/2" x 16" bundling chute area
27"W seal bar.

Shrink tunnel belt is 27"w X 77"L with 11-1/2" flap clearance
teflon mesh belt. Unit could accept up to 15"H product.

Removed in operational condition.

OAD's: 92"W x 195"L x 76"H



ILPRA tray sealer MODEL FP 800

ILPRA tray sealer
Model Food Pack 800 (FP800)
s/n FP1036 (1996)
Busch RAO-100 vac pump
230 volt
current tray size is 6" x 8"

OAD's: 70W x 60H x 67L


http://www.ilpra.com/index.php?option



Vortex Auto Adjusting Friction Feeder Model 1200L (2 avail)

Vortex Auto Adjusting Friction Feeder
Model 1200L

Unit A
s/n 040803

Unit B
s/n 040804


High-speed, Auto-adjusting Friction Feeder



Warranty cards, business cards, instruction sheets, product information, and promotional materials
Product manuals, magazines, brochures, sleeved compact discs, folded instruction sheets
Difficult to feed materials like embossed credit cards, nested backers and delicate sheets
Automates product feed into wrappers, conveyors, vacuum tables, and cartoners



Features





Auto adjusting results in high reliability
Improves productivity by eliminating feed errors
Eliminates the need for special operator skill
Ideal for collating with perpendicular feeds
Load low discharge high (high discharge models)
No operator adjustment for thickness
Easy set up and changeover
Simple knob adjustment for product width
Built in auto-loading infeed table with better operator ergonomics




Purpose



General feeder for pouches, magnets, credit card, and pharmaceutical inserts.
Minimum part size 2 x 2 in.
Maximum parts size 12 x 12 in.
Horizontal motorized in-feed eliminates gravity effect.
4 x 6 in. parts at 750 parts per minute.
8.5 x 11 in. parts at 350 parts per minute.
Operator interface with membrane keypad and LCD graphical display.




Overview



The Vortex™ is designed for a higher standard of reliablity and performance that businesses expect out of their investment. This new technology achieves higher productivity due to its reliable and robust design.

The Vortex™ Auto Adjusting Friction Feeder™ eliminates many of the problems associated with current state of the art friction feeders. Being completely auto-adjusting for product thickness, the Vortex™ eliminates time-consuming and skill dependent operator set-up and testing for product changeover. The auto-adjust design results in a highly reliable and robust feeder that assures the best throughput and efficiency available.

Unlike competitor?s friction feeders that use high friction forces to pull the product off the bottom of a high-pressure product stack, the Vortex™ uses a patent pending low-shear feeding technique that gently lifts the product into the feed and separation area. This means that the Vortex™ is not sensitive to the amount of product in the stack.

Also the Vortex™ reliably feeds and controls products that cannot be fed in friction feeders, without marking or damage. This includes softer paper products, embossed products and even some nested materials.

http://www.kepes.com/html/vortex.html



Wexxar Bel Model 200 Carton Snap Folder

Wexxar Bel Model 200 Carton Snap Folder

Model 200-0100025

Aluminum and Stainless construction

110 volt and air pneumatic

Side drive belts

New Bel 150 control box-start/stop

Last used in the food industry



Lazy Susan Turntable 72 inch diameter poly top

Lazy Susan Turntable 72 inch diameter
poly top with mild steel frame
115 volt 1/4 hp motor



Packaging Machinery Services 90 degree carton/tray sealer model 3-FL

Packaging Machinery Services 90 degree carton/tray sealer
Model 3-FL
s/n 547
Allen Bradley Panelview 300 controller
Nordson series 3500 glue pot

Recently removed from food service facility



Delta Hawk Stainless Steel Horizontal Flow Wrapper

Delta Hawk Stainless Steel Horizontal Flow Wrapper

S/N: 12

Mfg dat: 04/2004

Job 3212

480 VAC

11 ft infeed to front of plow

11 inch spacing between pusher lugs

5 ft discharge belt; 6 inch wide white belt; air blow off

9 inch wide, 2 up hot knife cutoff

16 inch across plow wings

20 inch long backstand rollers

Pin perforator for film

Portable on casters



Kliklok JR Tray Former S/N 612

Kliklok JR Tray Former
Serial# 612.



Durable OK flap closer Model RM 12 FC

OK Durable flap closer
Model RM 12 FC
s/n 089401
110 volt

very good condition

video available on request

OAD's: 48" x 43" x 71"H



I-Pak Machinery Flow Wrappper with Shrink Tunnel

I-Pak Machinery Flow Wrappper with Shrink Tunnel

Wrapper:

Model 2212A

s/n 92-653

240/60/3 40 amp

12" lug spacing

OAD's: 154L x 52W x 80H

Tunnel:

Model: SK17-120

s/n 92-159

240/60/1 30 amp

22" wide x 11"H

Variable Speed Controller for Tunnel

OAD's: 55 x 40 x 68

Tray Placer:

Minnesota Automation

Model # S5REL

Serial # B-8601

Air Operated tray placer


OAD's for combo:

210"L x 52"W x 80"H

Couple belts need to be replaced

Last used in a commercial bakery



Cleveland Equipment & Machinery Continuous Belt Table bag sealer

Cleveland Equipment & Machinery Continuous Belt Table Top Bag Sealer

Model DBF-900

2827/2 11 C8

5" x 29" belt

110 volt

32 x 16 x 12H

55 lbs

Used in very good working condition

Video of unit under power upon request



(866-888-6327 or www.clevelandequipment.com)

32 x 16 x 12H
55 lbs

video available on request



API L-bar bundler and shrink tunnel combo - large package

API L-bar bundler and shrink tunnel combo
2 combos available (1 each tunnel/wrapper)
Bundler/wrappers are 30" wide
Tunnels are 36" wide x 30" high x 96" long inside
Please inquire about separating units for individual sale.

Bundle wrapper 1:
Model DT3600I-EXH
32" wide seal bar (hot knife)
30" wide x 54" long 2 belt infeed area
S/N 515
06/97
480 volt

Tunnel 1:
Model DT3600-EXH
36" WIDE X 30" HIGH
Roller bar belt
S/N 515
06/97

Bundle wrapper 2:
Model DT3600I-EXH
32" wide seal bar
30" wide x 54" long 2 belt infeed area
S/N 516
06/97
480 volt

Tunnel 2:
Model DT3600I-EXT
36" wide x 30" high
Roller bar belt
S/N 516
08/97

All units are SS construction with casters on frames and screw down pads

OAD's:
Wrappers: 80"W x 87"L x 96"H
tunnels: 64"W x 132"L x 92"H

Amer. Pkg. Inc
Tampa, FL
813-888-8488



Mettler Toledo model 706 Autolabeler and Solo Mega wrapper

Mettler Toledo model 706 Autolabeler
Model 0706-0001-000
s/n: 3092394-3-JB
115 volt; 5 amps
with M-T model 317 stamper
model 0317-2001-000
s/n: 3092384-3-JB

Mettler Toledo Solo Mega Wrapper
Model 0647-1031-000
s/n 3090899-3-FB
208-230 VAC
Smart touch controls



Multivac misc. dies and plates

Goodman packaging machine misc. dies / molds

Goodman packaging machine misc. dies / molds
large assortment
will sell as one lot

call for more info



TUCS Equipment SS VFFS bag sealer TEVFF-10-L s/n 0056

TUCS Equipment SS VFFS bag sealer
Model TEVFF-10-L
s/n 0056
208/60/3
80 psi
Bell Mark Easy Print code dater
12" seal jaw
34" clearance to floor

OAD'S: 84"H X 50"W X 49" DEEP



TUCS piston pump

TUCS piston pump
designed to pump liquid or viscous product to TUCS baggers
We have 1 available
Will sell separately if requested

Unit B:
Model TC 12X51-12
Unit has bead blasted tag on frame
4 inch outlet
Probably went with bagger s/n 0056



Pankratz RT1800 Horizontal Form Fill Seal Stainless Steel

Pankratz RT1800 Horizontal Form Fill Seal Stainless Steel Sanitary

Model RT1800

Age 2007 Like new condition

PC based touch screen controller

10 inch wide cutoff knives/sealbars

PRODUCTION RATE: up to 140 BPM or linear film speed of 1800 inch/min.

PACKAGE RANGE:

Minimum 1.75"W x 4.25"L x 0.5"H

Maximum 8"W x 14"L x 3"H

230 volt 3 phase

3 cfm air

Gas flushed

Last used in the food industry

Used in excellent condition

We have parts AND operator manual for unit.

New cost is over 150k

Unit dimensions: 43W x 154L x 78H

skid dims: 48W x 168L x 88H



Mettler Toledo CI Vision Inspection unit MODEL 1 CAM CLOSURE

Mettler Toledo CI Vision Inspection unit
model: 1 cam closure
s/n 13892
MFG: 2010
220/60/1
80 psi




BROWSE OUR INVENTORY: BY CATEGORY or VIEW COMPLETE LIST or GO BACK